How to insert a reference to a blog in my entry?
Re: TZ HELP!
Hello Guest
  
  • Login
• Register…
• Start blog
  • Who, Where, When
• What can I do?
• What to Read?
  • Polls
• Avatars
• Interests
  • Cities and Countries
• Random blog
• Users search
  • Search
• Games
• Tests
• XYQE
  • Сообщества
• Talxy Chat
• Horoscope
• Online
 
Зарегистрируйся!

XYQE > Pinball > Re: TZ HELP! 1 April 2008 09:02:44

  Forums:   
  Discuss: 
  Recent forum topics: 
  Recent forum comments:
  Moderators:

Re: TZ HELP!

Skidog 1 April 2008 09:02:44
 I cannot take credit for this ...


Replace the pins and connectors at J101 and J114 and I bet the resets go
away.
If you want to play with it just a little, just pull and reset the
connectors at those two pins. Do it a few times. That will often give
you a
temporary fix.
Otto

or this

Make sure you wall voltage is at 120


Bob Presutti

<sean@splitrockprop­erties.com> wrote in message
news:874a6fdc-939a-­4e54-9338-2fad8d7e4e­1c@8g2000hsu.googleg­roups.com...
I have only had my TZ for about 2 weeks now - unfortunately the game
began to restart on me last night. When I press both flippers
simultaneously, the game re-starts itself, goes into self-test mode
and then carries on like I never started the game in the first place -
perhaps a power issue?
I also noticed that when the flippers are activated the lights dim a
bit - any thoughts or suggestions?
Thanks in advance everyone!
Sean


Add comment
Skidog 1 April 2008 09:00:16 permanent link ]
 Also, don't run it of an extenstion cord (especially a long one)

"skidog" <rpresuttiUNMUNGE@b­ellsouth.net> wrote in message
news:ekiIj.10245$Q5­2.6933@bignews9.bell­south.net...
I cannot take credit for this ...
Replace the pins and connectors at J101 and J114 and I bet the resets
go
away.
If you want to play with it just a little, just pull and reset the
connectors at those two pins. Do it a few times. That will often give
you a
temporary fix.
Otto
or this
Make sure you wall voltage is at 120
Bob Presutti
<sean@splitrockprop­erties.com> wrote in message
news:874a6fdc-939a-­4e54-9338-2fad8d7e4e­1c@8g2000hsu.googleg­roups.com...
I have only had my TZ for about 2 weeks now - unfortunately the game
began to restart on me last night. When I press both flippers
simultaneously, the game re-starts itself, goes into self-test mode
and then carries on like I never started the game in the first place -
perhaps a power issue?
I also noticed that when the flippers are activated the lights dim a
bit - any thoughts or suggestions?
Thanks in advance everyone!
Sean


Add comment
Otto 1 April 2008 09:02:44 permanent link ]
 
<sean@splitrockprop­erties.com> wrote in message
news:874a6fdc-939a-­4e54-9338-2fad8d7e4e­1c@8g2000hsu.googleg­roups.com...
I have only had my TZ for about 2 weeks now - unfortunately the game
began to restart on me last night. When I press both flippers
simultaneously, the game re-starts itself, goes into self-test mode
and then carries on like I never started the game in the first place -
perhaps a power issue?
I also noticed that when the flippers are activated the lights dim a
bit - any thoughts or suggestions?
Thanks in advance everyone!


Sean,

You are experiencing a reset. Not a big deal and a common problem on TZ.
Remember, the machine was designed to be used for a few years and then
thrown out. It is now nearly 2 decades old.

Pull and reseat the connector at J101. Do that several times and then see if
it resets.

If this fixes the problem, simply replace the the connector and the header
pins at J101.

Also, here is the Marvin guide for resets. As they recommend, check the easy
things first. Wall voltage, good line cord, etc.

http://www.pinrepai­r.com/wpc/index2.htm­#reset

Hth.

Otto


Add comment
 

Add new comment

As:
Login:  Password:  
 
 
  
 
Пожалуйста, относитесь к собеседникам уважительно, не используйте нецензурные слова, не злоупотребляйте заглавными буквами, не публикуйте рекламу и объявления о купле/продаже, а также материалы нарушающие сетевой этикет или УК РФ.


XYQE > Pinball > Re: TZ HELP! 1 April 2008 09:02:44

see also:
Worst customer service example for…
пройди тесты:
see also:

  Copyright © 2001—2008 XYQE
Idea: Miсhael Monashev
Помощь и задать вопросы можно в сообществе support.xyqe.com.
Сообщения об ошибках оставляем в сообществе bugs.xyqe.com.
Предложения и комментарии пишем в сообществе suggest.xyqe.com.
Информация для родителей.
Write us at:
If you would like to report an abuse of our service, such as a spam message, please .