I am at Expo and need to contact Wade Krauss who is at Pacific Expo.

If anyone has his email or best, his cell phone, please let me know.

Thanks

Hi,

So I was in a rush to sell WWF before the first load of wood pellets

arrived. I had two buyers. One came rushing down to look at the game

8 days ago, and decided to get it. Left me a non-refundable deposit

so I could hold it til Wed morning (two days ago). The deal was he

would pick it up Wed morning so I could stack the first round of

pellets (two tons worth). I also was working from home while they

delivered the pellets and installed the stove. Wed came and went.

Get an email that he's not coming, can I do it Friday (today) or this

weekend. I have since started to move the pellets in the basement and

they are everywhere because the pin is in the way. I can't do this

weekend or Fri, he then suggests Thur. I say fine, after work,

5-7pm. I get another email yesterday afternoon, he can't make it, how

about Friday (today). He has the day off, I can pick the time. Sure,

early morning, since I am working and have meetings, not to mention I

am not making a special trip home mid-day since I was home all day Wed

when it was supposed to be picked up in the first place. 9am comes

and goes, never get an email if he's coming or not. No email now and

its 11:15.

I told him this was exactly what I didn't want happening, which he

said wouldn't (and it did). I also told him that I am reposting and

will sell to the other guy, which means he loses that deposit. Am I

reasonable to allow this to drag a few days, since the deal was hold

til Wed morning, and now Friday I don't hear anything? The end result

is I get fucked, since its twice the work now stacking these bags of

pellets and another shipment is coming soon.

BTW, anyone wants a WWF, its now available for 700 again

Chris (in NH)

http://usergallery.­myhomegameroom.com/g­allery/maxbadazz

Point is, do any of you guys have something rigged up to help you keep

and prove scores that go beyond the flipping point?

I bought a AFM with pinball pro speakers and they make the whole

cabinet rattle at any reasonable volume. I hate them and am probably

going to swap them out with factory ones. What am I missing.

Discuss.

Dan

All flasher lights are not working on my Theatre of Magic. I swapped out

the bulbs with replacements and swapped out the power driver board with

another working power driver board which was repaired by Coin-Op Cauldron

and tested in my TZ, but the flashers are still not working in either

gameplay or from the flasher tests in the menu.

I cannot find any broken wires either. The fuses were also checked and

they appear to be fine. All connectors have been rechecked and

reconnected as well. The only strange thing that I could find under the

playfield is a six pin Molex connector which is not mated to another Molex

connector.

At this point I am not sure what else to check. In the backbox the wedge

906 bulbs are not lighting either and do not light during any of the

lighting/flasher tests from the menu. I am not sure what else to try at

this point. Any ideas are welcome.

Thanks in advance.

Gordon Bowar

Looking to find any type of sound board that has crowd cheering or

something similiar. Do not care what kind of machine it comes out of.

Wanting to enhance game I am restoring. Any suggestions welcome.

On Oct 3, 4:23 pm, "dan.littlejohn" <dan.littlej...@gma­il.com> wrote:

What does Stern care if we see the movie? They care about the

license, and very possibly, the license would not cover three movies.

I'm selling another completely restored 1934 Rockola World's Series. Some

info and a ton of detailed photos can be seen at www.audihere.com/ws­3

I'll be going up to the Pacific Pinball Expo on Saturday and can deliver

the game there or ship if necessary. Local pickup in Orange County, CA

would be great too.

If you have any questions about this game, please email me at

pinball@audihere.co­m

Thanks,

Chris

What do I need to do to make the impedance match up so I don't damage my

amp? It's a Bally 6800 if that matters.

Thanks for saving me from a google search!

--

-cody

--CARGPB4

Just picked up a CFTBL and in the diagnostics, the motors for the creature

and for the mirror barely move. I am not getting 48VAC from the TRIAC

boards. (A-13088) Since they both are not working, is there a typical

component that fails on these? I am trying to not have to reinvent the

wheel if someone has ran into this already.

THANKS!

-rr

Ok, here's an update. I found a broken trace going from U1 to z3--

fixed that and the board appears to boot ok on my workbench with the 5

volt power supply. But then there's the next issue--I look it out to

the machine and plugged it in, and it won't boot--there's no clock

pulses at U1 on pins 37 or 39 at all. Z3 has pulses on it, btw, in

case that makes any difference. Have a new rottendog power supply as

well, shows that 5v is coming out. I have not done any grounding mods

yet since the board works on the bench. Just plugging in J1 by itself

doesn't make difference either, still no bootup. Any suggestions?

I'm guessing that it has to do with the power supply or ground, since

those are the only two real differences. Thanks!

Taylor34

I need some edumacation, looking to possible purchase a fixer upper

Gottlieb system 80 (boardless), noticed from photos that ground bus

looks to have burnt pins/wires in the bottom cabinet, other than that

it looks decent. Is this a typical failure in the sys80 machines and

therfore the reason for all the grounding mods ? Or could the game be

toast ?

Picture is here http://home.roadrun­ner.com/~jamhome/pp/­Gwires.JPG

Thanks.

Signed

wannabe Gottlieb newbie

Hope everyone is having a good time at Expo.

Spider-Man redemption = S-M pinball code revisted ­

http://www.alsarcad­e.com/Expo08/EX08AW_­0010-1024.jpg

Hi all,

Have a Haunted House and had a weird thing happened. I turned it on

and the number 1 populates all the LED slots on all four players and

no ball ejects and no ability to start play. Any help would be

appreciated. Hibler, hurry home!!!

Thanks,

Dave